BOOST UR NET SPEED REDUCING XP UPDATE RESERVE SPEED

QoS Packet Scheduler is a method of network bandwidth management that can monitor the importance of data packets and depending upon the priority of the packet, give it higher or lower priority or bandwidth levels. It's not very useful unless you're using apps which are QoS-aware or running a server, so you can gain some network overhead back by turning it off.

Note: This following tip will not work on XP Home Edition.

1. Make sure you're logged on as actually "Administrator". Do not log on with any account that just has administrator privileges.

2. Start > Run > type gpedit.msc (not available in home version).

3. Expand the Local Computer Policy branch.

4. Expand the Administrative Templates branch.

5. Expand the Network branch.

6. Highlight the "QoS Packet Scheduler" in left window.

7. In right window double click the "limit reservable bandwidth" setting.

8. On setting tab check the ENABLED item.

9. Where it says "Bandwidth limit %" change it to read 0 (ZERO).

10. Close gpedit.msc.

Effect is immediate on some systems, some need to re-boot.

RAPIDSHARE IS FREE IF

1. Download Firefox


2. Rapidshare : Block Rapidshare cookies (so u do not need to delete it again and again) To do this; On Firefox click Tools, Choose Option, Choose Privacy, Choose Cookies, Click Exceptions, type: www.rapidshare.de and click Block.


3. Download FLASHGOT at https://addons.mozilla.org/firefox/220/

after downloading it restart browser then copy rapidshare link and paste it in the browser address bar then

click free then enter the three digit number and click download.

NOW YOU WILL BE ABLE TO DOWNLOAD THE FILE WITH YOUR DOWNLOAD MANAGER.

4. DOWNLOAD MULTIPLE FILES WITH DOWNLOAD MANAGER---------

FOR MULTIPLE DOWNLOADING JUST CHANGE YOUR IP ADDRESS OR CHANGE YOUR PROXY THEN IT WILL WORK FOR SURE

know WHO IS ONLINE IN OFFLINE

Firstly open your yahoo messenger main window and double click on the name of the person whom you want to check.The chat window will open obviously.

Click IMVironment button, select See all IMVironments, select Yahoo! Tools or Interactive Fun, and click on Doodle.
After loading the Doodle imvironment there can be two possibilities

1.If the user is offline Doodle are will show this "waiting for your friend to load Doodle" continuously .See in the picture below:

Find who is Invisible on Yahoo messenger - The Ethical Hacking 2. If the user is online (but in invisible mode), after few seconds (it can take up to one minute, depending on your connection speed), you should get a blank page like in the picture below.So you know that the user is online.

Alternate Method:

Chose a person you want to check .Double click to open the chat window.Now simply invite the person for a voice conference.This is done by clicking on the "conference' button on the top of the chat window.
If the talk button appears and turns green then that person is online.But if you receive the message 'Voice chat could not be started ' then the person is offline.

Note:Some people use softwares like buddy spy to check who is invisible.I DONT RECOMMEND you to use such third party softwares as they can expose your Pc to hackers by sending your personal information and can even steal information from your Pc.So avoid such softwares and instead use the simple tricks given above.

If you have any queries or would like to make some useful contribution to this topic feel free to drop a line in the comments section.

FREE INTERNET FROM AIRTEL MOBILE

You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle

1) Activate Airtel Live! ( It’s FREE so no probs)

2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows

Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2# / Try 99***1
Username and Password : blank

5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT

9) After a few seconds the page will start to load and you have the
WHOLE internet at your disposal. ***************************************************************************************************************

TWO





Under DATA COMM
~~~~~~~~~~~~

APN : airtelfun.com

USERNAME : blank

PASSWORD : blank

PASS REQ : OFF

ALLOW CALLS : AUTOMATIC

IPADDRESS :

DNSADDRESS :

DATA COMP : OFF

HEADER COMP : OFF


Under INTERNET PROFILES
~~~~~~~~~~~~~~~~

INTERNET MODE : HTTP or WAP (both worked for me)

USE PROXY : YES

IP ADDRESS : 100.1.200.99

PORT : 8080

USERNAME :

PASSWORD :

MULIPLE YAHOOMESSENGER WITHOUT SOFTWARE

Follow these steps
1. Go to Start ----> Run . Type regedit, then enter .

2.Navigate to HKEY_CURRENT_USER --------> Software --->yahoo ----->pager---->Test

3.On the right pane , right-click and choose new Dword value .

4.Rename it as Plural.

5.Double click and assign a decimal value of 1.


FINISH NOW!
Now close registry and restart yahoo messenger .For signing in with new id open another messenger

get rid of WINDOWS GENUINE LOGO treath

receiving "This copy of Windows is not genuine" notification. Have you ever wondered how to get rid of it?

The Windows Genuine Advantage notification checks if you have a genuine copy of Windows registered to that computer. It allows you to update your computer with the Windows updates. If you have installed it, and you do not have a genuine copy of Windows XP installed, then you may notice an icon at the bottom of your window before you Login. It will make you wait three seconds before allowing you to login.
WGA on the Login Screen

Here's how to get rid of it.

The Long Way:

*
The longer way is to restart your computer and go into Safe Mode. If you do not know how to boot into safe mode, view our tutorial. Once in safe mode, non-essential programs will not run, including WgaTray.exe (the Windows Genuine Advantage program). Once in Safe Mode go to C:\Windows\System32\ and locate and delete WgaTray.exe

Tongue outCheat notes for computer savy users:

1.
Restart your computer and boot into safe mode (press F8 while you restart your computer)
2.
In Safe mode browse to C:\Windows\System32\
3.
Search for WgaTray.exe and Delete it.
4.
Reboot your computer and you are done.

The Quick but more difficult way (requires speed):

* If you do not want to restart your computer and get into Safe Mode, you can do it in the following way. This requires a bit of speed with both the mouse and keyboard because every time you close the WgaTray.exe process, it will restart itself in less than a second.

* Go to C:\Windows\System32\ and locate WgaTray.exe and highlight it. Trying to delete this right now will not work since WgaTray.exe is currently running. Next press ctrl+alt+del and select the process tab. Find WgaTray.exe in the list. To make it easier to find it, you can sort the list in alphabetical order by clicking the Process title at the top. Highlight WgaTray.exe.

* Here's where your speed comes in. You have to end the WgaTray.exe process and then quickly go to the other window and delete WgaTray.exe.

* Tip: Press end process then enter, then alt+tab, then delete, then enter. This is the sequence you should go through.

* Note: If you do not delete WgaTray.exe before the program restarts itself, you will not be able to delete it. You will have to try again.

In both cases, continue with the following steps.

Next go to C:\Windows\System32\dllcache\ and delete WgaTray.exe here also.

Next you have to modify your registry.

* Press the Start Button > Run and type regedit and then press enter.
* Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify and delete the WGALOGON folder.

That's all you have to do, now you are WGA free. Just make sure you don't automatically install the WGA update again. Restart your computer to see if you did it correctly. The WGA logo should not appear on your login screen.

DISCLAIMER: We do not condone having pirated copies of Windows on your computer. You should have one CAL per computer. This is for educational purposes only.

tips for catalysing ur XP performance

1) Cracking Windows XP Login Password is if u get acess to the computer then go to Start>Run and type “control userpasswords2” without Quotes and a new pop up windows will open and u will reach to user account properties. Here u can Reset the Administrator and any Users password so anytime when u Want to use the Computer start it in safemode pressing F8 at Booting get into the xp as u have Administrator password and go to Controlpanel>Useraccounts and create a New Account .Start Computer Normally and get into WinXP with ur newely made account and do ur job. (Don’t forget to Delete ur newely made account Otherwise u will be in trouble) Delete ur account again starting the computer in Safemode as Administrator and Delete ur Account.



2) Disable XP Boot Logo It is possible to disable the XP splash screen, which will slightly speed up the overall boot process. Be aware that removing the splash screen will also cause you not to see any boot-up messages that might come up (chkdsk, convert ... ), but if your system runs without any problems then it should not matter. Edit boot.ini. Add " /noguiboot" right after "/fastdetect". Upon restarting, the splash screen will be gone. It can be re-enabled by removing the new switch.



3) Turn Off Indexing to Speed Up XP Windows XP keeps a record of all files on the hard disk so when you do a search on the hard drive it is faster. There is a downside to this and because the computer has to index all files, it will slow down normal file commands like open, close, etc. If you do not do a whole lot of searches on your hard drive then you may want to turn this feature off: Open My Computer. Right-click your hard drive icon and select Properties. At the bottom of the window you'll see "Allow indexing service to index this disk for faster searches," uncheck this and click ok. A new window will pop up and select Apply to all folders and subfolders. It will take a minute or two for the changes to take affect but then you should enjoy slightly faster performance.



4) Clean Your Prefetch to Improve Performance This is a unique technique for WinXP. We know that it is necessary to scrub registry and TEMP files for Win9X/ME/2000 periodically. Prefetch is a new and very useful technique in Windows XP. However, after using XP some time, the prefetch directory can get full of junk and obsolete links in the Prefetch catalog, which can slow down your computer noticeably. Open C(system drive):/windows/prefetch, delete those junk and obsolete files, reboot. It is recommended that you do this every month.



5) Performance Increase Through My Computer Easy enough tweak to usually find out about it on your own, but still, some of us still don't find it right away. So here it is: Start > right-click on My Computer and select Properties. Click on the "Advanced" tab. See the "Performance" section? Click "Settings". Disable the following: Fade or slide menus into view Fade or slide ToolTips into view Fade out menu items after clicking Show Shadows under menus Slide open combo boxes Slide taskbar buttons Use a background image for each folder type Use common tasks in folders There, now Windows will still look nice and perform faster.



6) Reduce 10 Second Scandisk Wait Time Start MS Dos Prompt (Start run CMD), and type: CHKNTFS /T:4 where 4 is the amount of wait time. CHKNTFS /? for more info.


7) DMA Mode on IDE Devices Just like Windows 2000, Windows XP still fails to set the DMA mode correctly for the IDE device designated as the slaves on the primary IDE and secondary IDE channels. Most CD-ROMS are capable of supporting DMA mode, but the default in XP is still PIO. Setting it to DMA won't make your CD-ROM faster, but it will consume less CPU cycles. Here's how: Open the Device Manager. One way to do that is to right-click on "My Computer", select the Hardware tab, and select Device Manager. Expand "IDE ATA/ATAPI Controllers" and double-click on "Primary IDE Channel". Under the "Advanced Settings" tab, check the "Device 1" setting. More than likely, your current transfer mode is set to PIO. Set it to "DMA if available". Repeat the step for the "Secondary IDE Channel" if you have devices attached to it. Reboot.



8) Load Internet Explorer the Fastest Way Possible Edit your link to start Internet Explorer to have -nohome after it. For Example: "C:\Program Files\Internet Explorer\IEXPLORE.EXE" -nohome This will load internet explorer very fast because it does not load a web page while it is loading. If you want to go to your homepage after it is loaded, just click on the home button.



9) Easy Way to Adjust Large SystemCache Normally, the tweak I've seen asks you to go into HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management and change the value to either O or 1 to the adjustment the LargeSystemCache. However, in Windows XP, all you have to do is: Right-click My Computer. Select Properties. Click Advanced. Choose Performance. Click Advanced again. Select either Programs or System Cache under Memory Usage. Programs = 0 for the registry tweak equivalent System Cache = 1 for the registry tweak equivalent




10)turn Off Autoplay for Program CDs How can you stop Windows XP from launching program CDs? Click Start, click Run, type GPEDIT.MSC to open Group Policy in the Microsoft Management Console. Double-click Computer Configuration, double-click Administrative templates, double-click System, and then click Turn off autoplay. The instructions on your screen describe how to configure this setting. Click Properties to display the setting dialog. Click Enabled, and choose CD-ROM drives, then click OK, to stop CD autoplay. This setting does not prevent Autoplay for music CDs.




11) Adjust Various Visual Effects Open up the Control Panel. Go under System and click on the Advanced tab. Click settings under Performance options. You can now change various graphical effects (mainly animations and shadows).




12) Disable Error Reporting Open Control Panel. Click on Performance and Maintenance. Click on System. Then click on the Advanced tab. Click on the error-reporting button on the bottom of the windows. Select Disable error reporting. Click OK. Click OK.




13) Increase Your Cable Modem or DSL Speed in XP This tweak is for broad band cable connections on stand alone machines with WinXP professional version - might work on Home version also. It may also work with networked machines as well. This tweak assumes that you have let WinXP create a connection on install for your cable modem/NIC combination and that your connection has tcp/ip - QoS - file and print sharing - and client for Microsoft networks , only, installed. It also assumes that WinXP will detect your NIC and has in-box drivers for it. If it doesn't do not try this. In the "My Network Places" properties (right-click on the desktop icon and choose properties), highlight the connection then at the menu bar choose "Advanced" then "Advanced Settings". Uncheck the two boxes in the lower half for the bindings for File and Printer sharing and Client for MS networks. Click OK.




14) Stop Jerkey Graphics If you are connected to a LAN and have problems with jerkey graphics, this might be the solution: Right-click "MyComputer". Select "Manage". Click on "Device Manager". Double-click on your NIC under "Network Adapters". In the new window, select the "Advanced" tab. Select "Connection Type" and manually set the value of your NIC. (Not "Auto Sense" which is default.). You should reboot.




15) Speeding Up Your Old Shit Pentium by 50% We all know that you really shouldn't try to run Windows XP on anything less that about a Pentium 3 of some sort if you are out for speedy operations and amazing reaction times, but for those of us with the good old Pentium 2's who want to see just how well we can run XP, we have to tweak as much as we can where-ever we can. A real killer to the system's performance is Windows Media Player. Although it may look desirable and fancy with it's rounded off edges and 3rd-Dimensional appearance, the truth is, it takes up a large amount of that precious processing power. All of these troubles however, lead to one thing in particular with this 'new-look' over-rated music and video player...the Visualizations. The look-great I'll admit but like a lot of software these days, it has no purpose. If you run the task manager, and click the Performance tab along the top, you'll see that when Windows Media Player is running and nothing else is active, it takes up around 50% of the processors power. Once these visualizations are turned off, it barely takes up 2-3% of the processors power, which leaves much more room for other applications to work efficiently. Here's how to disable the feature: Open Media Player. Make sure the Now Playing tab on the left is selected. Click the View menu along the top. Go down to Now Playing Tools